SARMS and Peptides
Tesamorelin 5 mg
Manufacturer: Kalpa Pharmaceuticals
Pharmaceutical name: Tesamorelin
Pack: vial (5 mg per vial)
⚠️ Provided in a lyophilized powder for stability
$42.00
$70.00
Shipping :
International
U.S. Domestic
Out of stock
Tesamorelin 5 mg from Kalpa Pharmaceuticals
Tesamorelin 5 mg is a research peptide made by Kalpa Pharmaceuticals LTD, India. Its active substance is Tesamorelin, a growth hormone releasing peptide. Each vial holds 5 mg of lyophilized powder.
The body does not keep GHRH around for long. Enzymes in the blood cut it apart within minutes, which is a problem for any study that needs a signal to last through a measurement window. Tesamorelin was built to solve exactly that.
The Modification That Makes It Last
Tesamorelin is a GHRH analog with one chemical group added at one end, called a trans-3-hexenoyl group. That addition blocks the enzyme that would normally start breaking the peptide down. The signal itself is unchanged, so the pituitary receptor still recognises it and still triggers growth hormone release. What changes is timing. A study gets a longer window to measure GH, and downstream IGF-1, without adding more dosing points. That is why labs pick this version when the question is about duration rather than a single spike.
Research Areas For Tesamorelin 5 mg
- Sustained GH release - studied for how long the signal holds.
- IGF-1 response - examined across the extended window.
- Visceral fat - tested in models of deep abdominal fat.
- Body composition - looked at for lean mass and fat changes.
- Liver fat - used where fat storage in the liver is measured.
All of this is laboratory research. Tesamorelin 5 mg is not a medicine and is not sold for human use.
Vial Details
- Manufacturer: Kalpa Pharmaceuticals
- Pharmaceutical name: Tesamorelin
- Pack: vial, 5 mg per vial
- Form: lyophilized powder for stability
How To Store Tesamorelin 5 mg
Keep the sealed vial cool, dark and dry. After mixing, store it in a fridge between 2 and 8 degrees Celsius and use it within a few weeks. Do not shake the vial. Roll it gently between your hands to mix, and keep your tools clean.
Stacks Other Labs Use
Tesamorelin is usually studied beside a peptide that works on the other GH receptor. Tesamorelin and Ipamorelin 5mg+5mg by Peptide Hubs combines both in one vial, and Sermorelin 5mg by Peptide Hubs covers the short acting version of the same signal. For the same peptide from other makers, see Tesamorelin 5 mg by British Dragon. Everything sits in our HGH & Peptides category.
Common Questions About Tesamorelin 5 mg
How is Tesamorelin different from plain GHRH?
It carries an extra group that slows its breakdown, so the signal lasts far longer in the body.
Do I need a prescription?
No. You can buy Tesamorelin 5 mg without prescription from our shop.
Why does the longer window matter?
Because growth hormone and IGF-1 do not peak at the same time. A longer signal gives a study time to measure both.
Order Tesamorelin 5 mg
Adding Tesamorelin 5 mg to your cart takes a minute. Compare it with the other makers on our site first, or head to the SARMS and Peptides category for the rest of our growth hormone peptides.
| Level | Dose size | Description |
|---|---|---|
| Dosage levels | ||
| Low | 100 mcg | Conservative entry point |
| Moderate | 250 mcg | Typical amount in research settings |
| High | 500 mcg | Upper limit of the commonly cited range |
| Essential information | ||
| Regulatory status | Approved by the FDA under the brand name Egrifta for HIV-associated abdominal fat; research versions sold without a prescription have no approval | |
| Half-life | Undetermined; estimates differ across sources | |
| Administration | Subcutaneous injection, just beneath the skin | |
| Dosing frequency | One to two times daily | |
| Maximum researched dose | 500 mcg | |
| Reported side effects | Injection-site reactions, nausea, stomach discomfort | |
| Please note | Values are unit conversions provided for reference, not medical guidance | |
| Reconstitution calculator | |
|---|---|
| Find out how much bacteriostatic water to add and how many units to draw on your syringe for your Tesamorelin dose. | |
| Peptide in the vial |
mg
|
| Bacteriostatic water |
mL
|
| Dose you want |
mcg
|
| Syringe |
|
| Results | |
| Choose your values and press Calculate. | |
| Concentration | — |
| Amount to draw | — |
| Units to draw | — |
| Doses in the vial | — |
| How the math works | |
| 1. Find the concentration | Divide the peptide in the vial by the water added. For example, 5 mg ÷ 2 mL = 2.5 mg/mL, which is 2,500 mcg/mL |
| 2. Work out the volume | Divide the dose by the concentration. For example, 100 mcg ÷ 2,500 mcg/mL = 0.04 mL |
| 3. Convert to units | On a U-100 syringe, multiply the mL by 100. For example, 0.04 mL = 4 units |
| 4. Check the syringe | Make sure the amount fits the syringe you are using |
| Worked example | |
| Vial | 5 mg tesamorelin |
| Water | 2 mL bacteriostatic water |
| Dose | 100 mcg |
| Syringe | 100 units (1 mL) |
| Concentration | 5 mg ÷ 2 mL = 2,500 mcg/mL |
| Amount to draw | 100 mcg ÷ 2,500 mcg/mL = 0.04 mL, which is 4 units on a U-100 syringe |
| Disclaimer | |
| This tool does math conversions only. It does not choose a dose for you or confirm product quality, safety, or medical suitability. | |
Reconstitution & Storage
Mixing a peptide takes about a minute. What people usually get wrong is what happens afterwards. Work through the steps in the guide above, then store the vial the way we lay out further down.
How to Reconstitute
The five steps above cover it. Let the vial and the bacteriostatic water sit out until they reach room temperature. Then run the bacteriostatic water down the inside wall of the vial, slowly, so it does not foam up. Swirl it gently until the powder is gone. Do not shake the vial, and do not squirt the bacteriostatic water straight onto the powder.
How to Store the Mixed Peptide
As soon as it is mixed, put the vial back in the fridge. 2 to 8°C (35.6°F to 46.4°F) is what you want, and it stays there until you have used it up. Write the mixing date on the label. Do not rely on memory for that.
- Temperature: an ordinary fridge, 2 to 8°C (35.6°F to 46.4°F). Not the freezer, not a kitchen cupboard.
- How long it lasts: around 4 weeks. Anything past 28 days goes in the bin.
- Light: keep it in the box or in a dark drawer. Light breaks peptides down.
- Handling: wipe the stopper with an alcohol swab before each draw, use a new needle and do not shake it. Swirl if it needs a mix.
- Freezing: never freeze a mixed solution. Ice crystals form, and a freeze and thaw cycle costs you potency.
- Throw it out if: the liquid goes cloudy, changes colour, or you can see particles in it.
The dry powder is much easier to keep. Store it dry and away from light, at room temperature if it is only for a short while, or at -20°C for the long term. Only mix what you are going to use.
No reviews found
Please log in to write Tesamorelin 5 mg review.
Related Offers
Axiolabs
Manufacturer: Axiolabs
Pharmaceutical name: Tesamorelin
Pack: vial (5 mg per vial)
⚠️ Provided in a lyophilized powder for stability
$42.00
$70.00
British Dragon Pharmaceuticals
Manufacturer: British Dragon Pharmaceuticals
Pharmaceutical name: Tesamorelin
Pack: vial (5 mg per vial)
⚠️ Provided in a lyophilized powder for stability
$42.00
$70.00
Peptide Hubs
Manufacturer: Peptide Hubs
Pharmaceutical name: Tesamorelin
Pack: vial (5mg)
$120.00
Domestic & International
-40% OFF
Dragon Pharma, Europe
Manufacturer: Dragon Pharma
Pharmaceutical name: Tesamorelin
Pack: 2 ml vial (5 mg per vial)
$42.00
$70.00
Shipped International
Shipped USA Domestic
$100.00
Shipped International
Shipped USA Domestic
$30.80
$44.00
Shipped International
Shipped USA Domestic
$88.00
Shipped International
Shipped USA Domestic
$66.00